Ghost Immobiliser Fitter
Ghost immobilisers are among the most effective ways to safeguard your vehicle from theft. They stop vehicles from being started without the correct code entered. They can be used to track vehicles remotely. These systems are becoming increasingly well-known, and many insurance companies give discounts to drivers who have installed them.
It is tamper-proof.
The Ghost Immobiliser is a sophisticated security device, prevents your vehicle from being started without a unique pin or beacon. The system can be modified to suit your vehicle and is extremely efficient as an anti-theft tool. After installation, it is crucial to test the system to make sure that it is working correctly. By entering the PIN when you start the engine is a straightforward method to verify that the system is set up correctly. Regular testing will help to identify any issues or problems with the system in a timely manner.
The system communicates with the ECU to stop your car from starting unless the proper sequence is entered. This can be done using the electronic buttons on your steering wheel or via an app for smartphones. Its low profile and tamperproof design make it difficult for thieves to steal. It can also be used with beacons to monitor the position of your vehicle. It is a great solution to protect valuable vehicles that have been modified or for those who wish to protect their expensive or rare vehicles.
This tamper-proof device makes use of the buttons on your steering wheel to create an exclusive sequence that you only know. The sequence is mathematically impossible for thieves to guess and can be changed easily by using a reset code. It is easily installed by a technician most vehicles.
After installing the device you will need to connect it an electrical source as well as a grounding point. Get the wiring diagram for your vehicle to identify the wires that are required. Be sure to insulate the connections with heat shrink tubing or insulation tape to avoid short circuits and electrical damage. Make sure you check the installation of the device as well as its connections to ensure there are no signs of tampering.
The Ghost 2 immobiliser cost can also be set to Service/Valet for older vehicles that require battery isolation to perform maintenance or service. This will disable the device using a unique pin code. This will stop it from being turned off again by thieves.
It is wireless
Ghost immobilisers cannot be detected by thieves, unlike other anti-theft devices. They can be put in various vehicles to guard against key cloning and hacking attacks as well as signal relay attacks. They can also be used to track vehicles remotely. They can provide owners with instant notifications when their vehicle is stolen. It's one of the most effective methods to prevent car theft, and certain insurance companies offer discounts to those who have these devices installed.
The Ghost II immobiliser offers a simple and affordable way to safeguard your vehicle from theft. It is wireless and compatible with the majority of vehicles. It is weatherproof and tamper proof, making it an excellent choice for any type of vehicle. It also comes with a 3-year warranty. In contrast to other security devices such as Ghost II is not a security device that Ghost II does not require any additional wiring or other external components. Its unique pin code sequence safeguards your car against key cloning and key theft by blocking the engine from starting without a disarm code is entered. This sequence can range from one to 20 buttons, meaning that thieves will need to invest much more time trying to break the code before they are able to drive away.
Another advantage of the Ghost II is its ability to block signals from a thief's key fob. It can detect whether a key fob has been stolen, hacked or copied and disable the engine by triggering an alarm. It can also prevent the use of a signal relay device, which is often employed by organized car-thief groups to gain access to vehicles.
It is important that you test the Ghost immobiliser system frequently to ensure it is working correctly. This will allow you to identify any issues early, and correct them before they become a major problem. It is an excellent idea to test the system by entering the PIN code and starting the engine as part of your regular vehicle checks.
It is essential that the immobiliser be placed in a position that is not accessible by thieves. If possible, hide the unit behind your dash using cable ties. Be sure that all connections are properly insulated and can't be altered by thieves. Double-check that the mounting location is secured.
It is compatible with a variety of vehicles
The ghost immobiliser is an effective security device that can assist in stopping car theft. It works by preventing the engine of your car from starting until the correct pin code is entered. This code can be generated by pressing a series of buttons that are already present on your steering wheel, door panel or central console. The immobiliser can be reprogrammed at any time by the owner. It is secure against tampering. It also protects against key-cloning and hacking.
While some drivers may attempt to install the Ghost Immobiliser themselves, it is recommended that you work with a professional. The installation process is difficult and a mistake could render the device ineffective or damage your vehicle. Additionally, DIY installation may cause warranty cancellation for both the Ghost Immobiliser and your vehicle.
A good place to start is to get the wiring diagram for your car model. This will provide a guide to locate the CAN H wires and CANL wires used for the immobiliser. Once you have identified these wires mark them so that they are not accidentally disconnected during the installation process. Choose a safe and reliable grounding point.
It is a good practice to test the immobiliser when the wires are connected to ensure that everything is functioning properly. After that, enter the PIN code to start the engine and verify that it runs correctly. It is a good idea also to check the immobiliser on a regular basis to ensure that it is functioning as it was it was intended.
ghost immobiliser and tracker has the benefit that it doesn't need keyfobs or LED indicators. It is able to be deactivated using a unique sequence on your door panel, steering wheel or the centre console. The immobiliser is also tamper-proof, and does not leave any evidence of its installation which makes it difficult for thieves to locate or disarm. Additionally it can be used to increase the security of your vehicle in the event of a break-in, and is recommended by numerous insurance companies.
Easy to install
The Ghost immobiliser, a highly sophisticated device, helps keep your vehicle secure even from the most experienced thieves. It prevents the vehicle from starting unless an individual PIN code or sequence is entered alongside the key fob. This blocks hacking, cloning or even key theft, meaning that thieves cannot steal your vehicle. It also makes use of a variety of other sensors that detect attempts to drive away and notify the owner or the police in event of tampering.
Installing a Ghost immobiliser can be a challenge, particularly for those who have not installed alarms or security systems prior to. Utilizing the appropriate tools and materials is crucial to a successful installation. A multimeter can be used to verify electrical values, and insulation tape and cable ties can help protect connections. The user manual for the Ghost immobiliser provides specific guidance specifically tailored to the model of your vehicle and wiring.
During the process of installation, it's important to check the location of the CAN H and L wires to ensure the accuracy. They are vital for powering the immobiliser so mistakes could result in improper functioning or system failures. You should also mark the wires using a piece of tape or labels to keep track of the wires. You should also identify an uninterrupted source of 12V and a grounding.
Once you have the correct location, you can begin making the ghost immobiliser. To avoid short circuits or a mistaken airbag deployment, you'll need to shut off the battery first. The next step is to connect the wires. Be sure to follow the steps in the user's guide to ensure a safe and secure installation.
After you have completed the wiring, connect the Ghost immobiliser via CAN to the engine control unit. It will be a challenge for thieves to steal the device, as the device is directly connected to the engine control unit. They can't remove or disable it. It's also tamperproof and the only way to disable it is to enter a pin code is to enter a personal one. The pin code will only be used by the owner of the vehicle as well as the installer.
You can also make use of Ghost immobiliser to temporarily permit someone else to drive your car, such as when you're out of town for business or need service. This feature is known as Service/Valet mode and you can enable it with an app for mobile devices or the key fob.